|
|
| Industrial Robot Vision and Options |
| Two-Axis Servo Positioner |
 |
| Description |
| FANUC Robotics’ Two-Axis Servo Positioner is a high performance positioner designed to provide automation integrators a flexible, reliable and cost effective solution for part and tool manipulation. Two-Axis Servo Positioner includes FANUC servo motors, integrated piping and weld power cable, near zero backlash RV-reducer and faceplate with dowel holes to ensure fixture location repeatability. | |
| |
|
| Arc Welding Solution Arm |
 |
| Description |
| FANUC Robotics’ Arc Welding Solution Arm provides many advantages over a conventional robotic torch configuration. The Dress-out Package eliminates the typical torch offset, increasing the stability and reliability of the torch cable assembly. Increased arc density is easily achieved with two or more robots working closely together without interference. | |
| Tools |
Datasheet
 | | |
|
| AccuChop |
 |
| Description |
|
AccuChop is a process control package used in fiberglass lay-up applications which provides features for resin and glass delivery rate control and display, as well as various detection alarms. AccuChop is designed for both gelcoat (resin and catalyst) and chopped fiberglass (resin, catalyst and glass) applications. Both resin flow and glass feed can operate under open loop or closed loop control. The functionality provided also handles error recovery events and does not require PLC logic to spray parts. | |
| Tools |
Datasheet
| | |
|
| AccuDeflash |
 |
| Description |
| FANUC Robotics developed AccuDeflash, an innovative patented process for robotic deflashing and trimming of a wide variety of plastic parts. The process utilizes the speed, repeatability and reliability advantages of FANUC robots to provide a consistent automated process. The process allows a robot to deflash and trim plastic parts that may vary in size or shape. AccuDeflash is successful because it tolerates part-to-part variations. | |
| |
|
| ACCUFLOW |
 |
| Description |
| ACCUFLOW is a closed loop fluid delivery control system providing quality paint performance improvements for use with FANUC Robotics’ finishing systems. ACCUFLOW’s ability to correct for dynamic changes in fluid pressure, viscosity and other flow parameters provides consistent, repeatable fluid delivery volume. | |
| Tools |
Datasheet
| | |
|
| ACCUmist |
 |
| Description |
| ACCUmist is a process control package used in die spray applications which provides features for precision delivery of die spray as well as interactive process control and monitoring. Unlike traditional flooding-style die sprays, ACCUmist process control capability allows the die caster to make the necessary adjustments to avoid overspray die problems such as under/over cooling and improve productivity by reducing downtime for die maintenance and die repair. | |
| |
|
| Adaptive Welding |
 |
| Description |
| FANUC Robotics has taken its proven arc welding process technology and combined it with the joint sensing capabilities of the Servo Robot sensor to offer a real time adaptive welding process. Operating within the ArcTool application software is a user-definable adaptive algorithm that utilizes sensor feedback to dynamically adjust welding parameters. These parameters include weaving, travel speed, voltage and wire feed speed to volumetrically fill the supported joint designs. | |
| Tools |
Datasheet
| | |
|
| Customer Resource Center (cRc) |
 |
| Description |
| FANUC Robotics created the cRc Internet Access Solution as a way for customers to have easy access to the Customer Resource Center and its solutions. The cRc Internet Access Solution is a secure subscription-based Internet site allowing customers to be able to directly connect to the functions of FANUC Robotics’ Customer Resource Center. Customers can register via www.fanucrobotics.com to gain access. | |
| Tools |
Datasheet
| | |
|
| FANUC Robotics' World-Class Call Center |
 |
| Description |
| FANUC Robotics is continuously redefining the performance of a traditional customer support call center. Our objectives are the ease of doing business and improving customer satisfaction. We accomplish this by investing in automation and the industry’s best people to create the most responsive and advanced call center. | |
| Tools |
Datasheet
| | |
|
| Integral Pump Control |
 |
| Description |
| The FANUC Robotics Integral Pump Control is designed for the application of one or two component paint materials. IPC features metering pumps directly coupled to FANUC servo motors which are operated by the SYSTEM Robot Controller. | |
| |
|
| Integral Servo Dispenser |
 |
| Description |
| FANUC Robotics’ Integral Servo Dispenser (ISD) is a precision metering device designed to enhance performance and provide accurate control of material used in FANUC Robotics’ sealant automation systems. | |
| |
|
| Multi-Function Gun Sealer Applicator |
 |
| Description |
| This applicator is intended for use with a volumetric controlled metering device like FANUC Integral Servo Dispensing-ISD = +/-1% or FANUC Integral Pneumatic Servo-IPS = +/- 3%. | |
| |
|
| Multi-Stream Applicator (MSA) |
 |
| Description |
| This applicator is intended for use with a volumetric controlled metering device like FANUC Integral Servo Dispensing-ISD = +/-1% or FANUC Integral Pneumatic Servo-IPS = +/- 3%. | |
| |
|
| Robotic Maintenance Services |
 |
| Description |
| FANUC Robotics Customer Resource Center (cRc) offers robot maintenance programs which promote customer productivity by reducing breakdowns, maximizing robot uptime and improving program efficiency. Our mission is to be more proactive in the operation and maintenance of your robot to reduce production downtime and reduce the Mean Time to Repair. | |
| Tools |
Datasheet
| | |
|
| ServoBell Paint Applicator |
 |
| Description |
| The ServoBell Paint Applicator is an electrostatic direct charge waterborne rotary bell atomizer developed by FANUC Robotics America, Inc. The ServoBell is designed for high-performance, robot bell spray applications. | |
| |
|
| ServoTorch |
 |
| Description |
| FANUC Robotics ServoTorch is a fully-integrated, servo-controlled, wrist-mounted, four-roll (4) “Pull” wire feeder controlled by the ARC Mate series robots. The design is optimized to feed aluminum and soft wire. The drive motor is a proven FANUC high torque servo motor with a pulling capacity suitable for unassisted wire feeding from conventional spools or pay-off packs. | |
| Tools |
Datasheet
| | |
|
| SpeedDock Color Change Station for ServoBell |
 |
| Description |
| FANUC Robotics' SpeedDock Color Change Station is a complementary product to the direct charge waterborne ServoBell rotary bell atomizer. | |
| |
|
| Training Solutions |
 |
| Description |
| FANUC Robotics provides formal training solutions to customers on our standard robot product line and systems designed and supported by the company. FANUC Robotics provides training assistance in many formats including instructor support, train-the-trainer programs, customized product training, computer-based training programs and distributor training programs. | |
| Tools |
Datasheet
| | |
|
| VersaBell Paint Applicator |
 |
| Description |
| The VersaBell Paint Applicator is an electrostatic rotary atomizer developed by FANUC Robotics America, Inc. The VersaBell is designed for highperformance, robotic bell spray applications. | |
| |
|
| VersaBell Test Stand |
 |
| Description |
The FANUC Robotics’ applicator test stands are electric-pneumatic devices used to test the FANUC Robotics’ VersaBell and ServoBell applicators.
When properly utilized, the test stand can decrease production downtime by insuring the paint applicators are functioning properly before they make it to production. The test stand is used to test all pneumatic, bell speed and high voltage functions of the applicator.
The dual test stand can test the same functions on both the VersaBell I and VersaBell II applicators. | |
| |
|
|
|
|
|
